BSOD blue screen of death

Ahh, the days of BSOD. I don't miss them at all. It could most likely be due to hardware conflicts. Check those. If you don't want to waste your time at all, I think it would be beneficial to get a new computer and not mess with any of its parts. Though I solved my BSOD error, it was only a minor hardware complication. It was a virus. Had to scan the whole PC with mbam, and the BSOD stopped showing up. Again, if you don't feel like going through any complications/work fixing the hardware, just get a new PC and don't mess with it. If you happen to get a BSOD without messing with the hardware, then scan your PC and it should stop BSODing.

First, the crash caused by hardware Poor heat dissipation Monitors, power supply and CPU in the work of heat is very large, so good ventilation is very important, if the monitor will lead to overheating color, image distortion, or even shorten the display life. Long working hours can lead to power supply or monitor a computer crash caused by poor heat dissipation. CPU cooling is related to the stability of the computer is running an important issue, but also thermal failure occurred a "disaster area." Mobile inappropriate Move the process on the computer are often under great vibration of the device will loose inside the machine, resulting in poor contact, causing a computer crash, so when the mobile computer should avoid severe vibration. Killer dust Excessive dust inside the machine can cause crash failures. Such as the floppy drive head or contamination of laser head too much dust, it will lead to read and write errors, the computer will cause a serious crash. Device does not match the Such as the motherboard does not match the frequency and the CPU frequency, the old motherboard when overclocking FSB set too high, it may not be able to guarantee the stability of operation, resulting in frequent crashes. Hardware and software is not compatible Three-dimensional software and some special software, may not work on some computers and even to start the installation, which may have hardware and software compatibility issues. Memory fault Mainly memory loose, cold solder joint or memory chip itself due to the quality. Should be based on the specific circumstances to exclude memory access fault, if it is the quality of memory problems, it would take to replace the memory in order to solve the problem. Hard Fault Is mainly due to aging or improper use of the hard disk caused bad sectors, bad sectors. This machine is very prone to crash at run time. Can use special tools to troubleshoot software to deal with, such as serious damage can only replace the hard drive. For additional motherboards do not support UDMA 66/100 should pay attention to the hard disk operation mode CMOS settings.

When does it come? Please be more specific. What is your os, exactly when do you see BSOD

it might be mostly due to a hardware conflict...check the hardware product and get it replaced....lolz i@mhErO!