Safeguard SKF bearing

Tweet

Safeguard SKF bearing is the essential condition of SKF bearing operation, the commonly used maintenance is for SKF bearing lubrication, under the premise that knowing SKF bearing lubrication method, it is necessary to know about SKF bearing system maintenance is also, under the tianjin g diss bearing company will introduce you how to SKF bearing lubrication maintenance. 1, the amount of lubrication filling to be appropriate Fatliquoring amount is too big, can make friction torque increases, the SKF 6205 Bearing Parameter temperature rise, increase of fat consumption; And fatliquoring quantity too little, cannot obtain reliable and smooth and dry friction. Generally speaking, appropriate amount of fatliquoring for bearing inner 1/3 ~ 1/2 total void volume. But according to situation, sometimes it is should be on the edge of the SKF bearing with grease and cavity lubrication. 2, pay attention to prevent different kinds, grades and the mix of old and new grease Avoid fat container and tool use, otherwise, will have a drop point on lipid drops, cone into the degree increased and mechanical stability etc. 3, attaches great importance to the new grease . Safeguard SKF bearing By Yu Run fat varieties, quality is in constant improvement and change, the old equipment to switch to the new grease, should look after the test, trial rear can officially use; When change the new fat, should first remove waste grease, clean parts clean. When adding grease, waste should be fat extrusion, when fat mouth see new grease. The management of 4, attaches great importance to the process of filling grease Strict attention must be paid before receiving and filling grease, containers and tools clean equipment for fat mouth should be wiped clean, protected from mechanical impurity, mixed with dust and sand. Safeguard SKF bearing 5, pay attention to the season with fatty change in time Such as equipment environment in winter and Xia Li and change of temperature difference is bigger, if with the fat of the winter or summer, on the other hand, the result will be counter-productive. 6 and attention on a regular basis in grease The add of the grease in time should be used according to specific circumstances, to ensure the reliable lubrication and not cause fat waste. Safeguard SKF bearing 7, don't use wooden or paper packaging grease To prevent loss of oil harden, mixed with water or contaminated metamorphism, and should be stored in a cool and dry place.