The advantage and Application of Wrapping Veneer

Tweet

Wood edge banding veneer is wildly used in many fields. The veneer covered on MDF can be used on the use of windows, door frame and veneer moldings, it preserves the beauty of wood, but also greatly reduce the waste wood and saving cost. More important, it successfully resolved in the decoration, furniture, veneer doors, flooring matching problem. Edge banding is a common way of making inexpensive wood materials look more refined and more finished. In edge banding, a length of a veneer product is applied to the raw edge of plywood or particle board (other surfaces can be used) and glued into place, thus given the edge a more finished appearance. Nowadays, we are able to buy glued finger jointed veneer. The veneer with hot melt glue back can been easy used, just need hot-press, the veneer will be stick to the board. Edge banding can also be used to make it seem as if a certain type of wood is being used when, in fact, it is not. The practice is commonly used in interior decorating and in the manufacture of affordable furniture. Wood Edge banding is usually sold in rolls. The material can be natural wood veneer, engineered wood veneer, dyed veneer and bamboo veneer. The thickness of the material is generally from 0.15mm-0.6mm, though there are exceptions. The width is usual from 8mm-300mm, 1 roll length usually from 100-300meter according to customer requirements. Created by (July Wood Bamboo & Products Factory)