Introduction of Bamboo Veneer

Tweet

Bamboo Veneers are Sliced Cut Veneers, which are obtained through a self-invented procedure. By using this procedure and a set of sophisticated machines, top quality is always achieved but the cost is minimized. Due to the attractive features and cheap costs, our Bamboo Veneers are widely used in renovation, furniture making, wall & ceiling decoration, flooring and any other place where wood veneers may apply. Our Bamboo Veneers come in seven different patterns, which are Natural Horizontal, Natural Vertical, Carbonized Horizontal, Carbonized Vertical, Zebra, Dyed and Woven. The materials used at the back of the veneer could be chosen from fleece and paper. They may also be delivered without any cover at the back. Special dimensions could be produced according to customers’ requirements. Some Useful Figures: Maximum Dimension: 2850mm (L) x 1250mm (W) x 0.15 – 0.6mm (H) Regular Thicknesses: 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm and 0.6mm Popular Dimensions: 2500mm (L) x 1250mm (W) x 0.5/0.6mm (H) 2500mm (L) x 320/430mm (W) x 0.15 – 0.6mm (H) Patterns: Natural Horizontal, Natural Vertical, Carbonized Horizontal, Carbonized Vertical, Zebra, Dyed and Woven panel Materials at the back: Fleece, Paper, and None Features and Applications Bamboo veneer use high-quality bamboo as raw materials, glued with environmental-friendly adhesives, It pressed into a bamboo block, after soften, with advanced equipment and technology, they are been slice into thin piece, from thickness 0.2-0.6mm Technical parameters: Moisture content: = 12% ;Density: 680 kg / M3 ;Formaldehyde release: 0.01mg/M3 ;Machinable thickness: 0.25-2.0mm ;Max size: 1270x3100mm Backing fleece technical parameters: Features: European imports of cellulose paper Weight: 30 g / m2 Use Glue: D3 water to meet European standards of environmental protection glue. Created by (July Wood Bamboo & Products Factory)