Universal joint bearing vibration influence on the accuracy

Tweet

Use direction adjustment factors, mainly in the installation and maintenance, repair and maintenance in accordance with technical requirements. According to SKF bearing, technical requirements, use, maintenance, installation and maintenance of work burden WanXiangJie handling, labor, noise, vibration velocity and temperature, check and supervision, lubrication condition, search the cause of the abnormal, so that returned to normal immediately. Installation conditions of use is one of the primary factor, bearing factor is usually by the installation direction, is not appropriate to ShouLi change direction between the parts do not work in normal state, and complete before the service life of the main factors, namely in the structure design, manufacturing and quality of the three factors on the quality of the material such as decision relevance. 1) direction between the design parameters of TaoJuan toll: rolling bearing thick walls, the band Tours, etc. (2) the manufacture of parts and related error of guidance and doug: surface roughness, volume, roundness. And degree of large, carved SKF dominated the influence of experimental research direction, and the vibration influence the surface roughness and the roundness is relatively small. 3) to the working conditions of operation in the process, conditions: the direction of the speed, in the three aspects of the burden, the vibration of the lubrication effect is more relevant. Shaft bearing: 4) parameters and installation direction and installation of bias, as also, the influence of such factors as the vibration of the correlation. In a circle, the bearing outer ring spinning and doug money, because the exhibition is coils, therefore, running track, known as the trajectories, doug's sake, do not belong to the exception, loading condition of the yard, so for the harsh and observation WanXiangJie direction, please note that adding path is carried out. Will run if you look carefully, burden of, only need to bear radial load, under axial load, or in extreme inequality and guidance. Whether can provide accident SKF load error and install GuoDa, if on the runway for bearing damage. If there are no mistakes and be able to choose the correct use of words, hope WanXiangJie direction, but in a long period of time, in this case, the national injury peel. On the other hand, there are damage, and in the early days, damage we fall into the wound, lubrication and why early may use no foreign body, therefore, in the wrong direction, the deviation of the assembly and shaft intrusion, research the appearance of the large box and enough. It can be said that these reasons are identical with each other. So, in order to fully understand the direction under the condition of the use of the machine, the periphery of the SKF bearing structure, according to the situation, if before the accident WanXiangJie direction, combined with the injury and discuss a variety of reasons, to prevent similar accidents from happening again.