pc

It is always wise to assemble a pc yourself. Because you can take hardware of your choice and for your specific needs. As far as set up or assembly of a PC is concerned it's very easy.I am giving the list of Harwares. 1. Cabinet with SMPS 400 watts. 2. Motherboard Intel original 915 with FSB = 800 mhz 3. Processor Intel 2.8 GHZ HT enabled. 4. DVD writer having dual layer burning capacity. 5. HDD(Hard Disk Drive) SATA 120 GB or more. 6. DDR2 Ram atleast 2 GB FSB of Ram should be 400 Mhz. 7. Monitor TFT 19" Any brand of your choice. 8. UPS 500 watts. 9. Connectors one set. 10.Power Chord. With mother board you will get a book, in which setting of Bios, and all power & device connections information has been provided. Take it's help & start assembling. Touch the ground with your hand or foot to discharge any static electricity. First fix mother board in the cabinet.Than HDD, Optical drive(DVD Drive)conect all required conectors in place after pushing the Ram in it's slot & lock it by a lock on mother board. One thing you must know is, all connectors fit only to another connector where it should be fited.Give power & boot with a bootable CD or DVD, go to bios set it up. Install & here is your own PC.

my brother is a computer tchnician. perhaps you could ask for some ways and procedures on how to set up a PC. because our PC was just huilt by my brother...